NAV6 eNAVTEX System Installation & Quick Start Guide
10
Connecting an eNAVTEX Receiver to your PC/Laptop
If you are going to use the eNAVTEX App with an eNAVTEX Receiver, you need to connect the
eNAVTEX receiver to the PC/laptop; otherwise you should skip this section.
IMPORTANT: Install the eNAVTEX App before connecting the eNAVTEX receiver to your
PC/laptop to ensure that the correct Plug and Play USB drivers are present.
First follow the installation instructions supplied with your eNAVTEX Receiver to get your
receiver powered up and connected to an antenna and optionally to a NAV6 display.
Then, connect the supplied 1m USB lead to the Micro USB Type B socket of the NAV6
eNAVTEX Receiver.
Micro USB Type B
Connect the other end (Type A) into a spare USB slot on your PC/Laptop.
HELPFUL ADVICE: If the enclosed USB cable is too long or too short then a standard USB type
A to micro type B lead can be used to replace the supplied lead. ICS stock a range of bulk
head/flush mount USB sockets that may prove useful as an alternative to a fixed connection
lead.
