ICS Advent PCI-DIO32, User Manual

Page: 17 / 28

Installation 2-1
Chapter 2
Installation
Board Setup
The PCI-DIO32 board is a fully compliant PCI “Plug-n-Play” adapter. All
board resources (I/O address and IRQ) are autoassigned by either your system
BIOS or your “Plug-n-Play” operating system.
Software Installation
For Windows Users
Run setup from floppy disk 1. Then, install SeaI/O and select the Digital I/O
software drivers. For users of DOS, Windows 3.1, etc., run disk 3 and the Read
Me file.
System Installation
The PCI-DIO32 board can be installed in any PCI expansion slot as follows:
1) Turn off system power. Disconnect the power cord from the electrical
outlet.
2) Remove the chassis cover.
3) Locate an available PCI slot and remove the associated slot filler
bracket from the rear panel of the chassis.
4) Gently insert the PCI-DIO32 into the PCI expansion slot. Make sure
that the board is seated properly.
5) Secure the board’s slot bracket to the rear panel with a screw.
6) Replace the chassis cover.
7) Plug the power cord into an electrical outlet.