background image

Page - vi

Return Procedure

For any Guarantee or Limited Warranty return, please contact ICS Advent's Customer Service at

800-480-0044

 (U.S.) or 

858-677-0877 

(international)

 

and obtain a Return Material Authorization (RMA)

Number.  All product(s) returned to ICS Advent for service or credit 

must

 be accompanied by a Return

Material Authorization (RMA) Number.  Freight on all returned items 

must

 be prepaid by the customer who

is responsible for any loss or damage caused by common carrier in transit.  Returns for Warranty 

must

include a Failure Report for each unit, by serial number(s), as well as a copy of the original invoice showing
date of purchase.

To reduce risk of damage, returns of product must be in an ICS Advent  shipping container.  If the original
container has been lost or damaged, new shipping containers may be obtained from ICS Advent Customer
Service at a nominal cost.

ICS Advent owns all parts removed from repaired products. ICS Advent uses new and reconditioned parts
made by various manufacturers in performing warranty repairs and building replacement products.
If ICS Advent repairs or replaces a product, its warranty term is not extended.

ICS Advent will normally return your replacement or repaired items via Second Day Air. Overnight delivery
or delivery via other carriers is available at an additional charge.

Limitation of Liability

In no event shall ICS Advent be liable for any defect in hardware, software, loss, or inadequacy of data of
any kind, or for any direct, indirect, incidental, or consequential damages in connection with or arising out of
the performance or use of any product furnished hereunder.  ICS Advent liability shall in no event exceed the
purchase price of the product purchased hereunder.  The foregoing limitation of liability shall be equally
applicable to any service provided by ICS Advent or its authorized agent.

Some 

Sales Items

 and 

Customized Systems

 are 

not

 subject to the guarantee and limited warranty.

However in these instances , any deviations will be disclosed prior to sales and noted in the original invoice.

ICS Advent reserves the right to refuse returns or credits on software or special order items.

Summary of Contents for PCI-COM485/8



























Reviews: