Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
NOTE: Notes provide additional information that could be useful.
CAUTION: Cautions provide important information about an operational requirement.
USB Ranger® 2201 Product Contents
Your USB Ranger® 2201 is packaged with:
• LEX unit (Local Extender)
• REX unit (Remote Extender)
• REX AC power adapter (1)
• USB 2.0 Cable (6 ft)
• Quick Start Guide and Warranty Information
An additional AC power adapter may be purchased for the LEX unit in the event that your USB port can not supply the
required 500mA current. Please contact an Icron Sales representative for further details (See Page 13).
Requirements
To complete the installation, you will also require the following items that are not included with the product:
• USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant operating system
• USB 1.1 or 2.0 compatible device
• Cat 5 Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling),
• OR, Cat 5 cabling with two information outlets and two Cat 5 patch cords with RJ45 connectors
(if using premise cabling)
All references to Cat 5 cable in this document represent the minimum requirement at solid core Cat 5 unshielded twisted
pair Category 6 or better or STP cable may be substituted.
About the USB Ranger® 2201
The USB Ranger® 2201 incorporates Icron’s patented ExtremeUSB® technology, enabling users to extend
beyond the standard 5m cable limit for USB peripheral devices. With the USB Ranger® 2201, USB devices can
be located up to 100 meters (330 feet) from the computer.
The USB Ranger® 2201 is composed of two individual units: the LEX unit and the REX unit.
note
note
note
3
