USB device is
attached to REX
USB port but
REX device LED
is off.
• A USB device must have the
appropriate driver installed on
the computer operating system.
1. Install the required USB device driver on the
computer operating system prior to attaching the
USB device to the REX unit. Please see your USB
device manufacturer’s website for details.
2. Consult your USB device documentation and
power your USB device with the additional, USB
device manufacturer supplied, power supply (if
available).
Device LED
is orange
and units are
no longer
functioning.
• Overcurrent condition has
occurred because USB device
draws more power than can be
supplied per USB specification
(500mA).
1. Power cycle REX.
Host and LINK
LEDs on LEX/
REX units blink
intermittently.
• Firmware mismatch between
the LEX and REX.
1. Use a different LEX/REX pair which have the same
firmware revision.
2. Upgrade the LEX/REX firmware, contact technical
support for assistance.
NOTES
10
