Installation Guide
Example Application
Requirements
To complete installation of the SP3022, you will also require the following items that are not included with
the product:
• USB 3.0 compatible computer (host computer) with a USB 3.0 compliant operating system
• USB 3.0 compatible device
• 2-strand 50/125μm multimode (MMF) fiber optic cable with Duplex LC connectors
note
The maximum length of the multimode fiber (MMF) optic cable supported by the SP3022 system, including patch
cords, is 100m for USB 3.0 cameras, and 50m for other devices.
Fiber Optic Link Cabling
The Local Extender and Remote Extender are interconnected by fiber optic cabling. This cabling must be:
• 50/125μm multimode fiber (MMF)
• Terminated with Duplex LC connectors
The following maximum distances are achievable depending on the application and cabling standard:
• Using OM3, up to 100m is achievable with USB 3.0 cameras, and up to 50m for all other applications.
• Using OM2, up to 50m is achievable for all applications.
note
For assistance sourcing appropriate fibre optic cabling, contact Technical Support.
If premise cabling will be used for the installation, then the distances provided above must be met when
measuring from Local Extender to Remote Extender, inclusive of the premise cabling and the patch cables.
All cables must meet the ratings specified. Patch cables must be terminated with Duplex LC connectors.
6
Local Extender
USB 3.0 Camera
Remote Extender
Assembly Line
Computer & Monitor
USB 3.0 up to 100m
over multimode fiber
