The Local Extender
The Local Extender connects to the computer using a standard USB 3.0 cable. Power for this unit is provided
by the USB on the host computer.
Front View
Rear View
ITEM TYPE
DESCRIPTION
1
Power ON
Unit is powered properly.
Power OFF
Unit is not powered or not powered properly.
2
Status Blinking (1Hz)
Waiting for connection to Remote Extender.
Status ON
Local and Remote Extenders are linked and operating normally.
Status OFF
Fault detected; power cycle required.
3
Host ON
SuperSpeed Host detected on upstream facing port.
Host OFF
SuperSpeed Host not detected.
4
Power Port (optional)
Not required in normal operation. An optional 5V power supply
can be connected to the Local Extender to provide power if the
USB port on the host PC is not capable of delivering sufficient
power to the unit.
5
Config Port
Reserved for manufacturer use.
6
USB 3.0 Type B port
Used to connect the Local Extender to the host computer. Port
accepts locking or non-locking USB 3.0 Type B connectors.
7
Link Port (Duplex LC)
Extension link Duplex LC fiber optic transceiver port.
4
