23
If
current channel is not recording, current setup gets activated when the channel begin
recording the next time.
If current channel is recording now, current setup will get activated right away, the current file
will be packet and form a file, then system begins recording as you have just set.
After all the setups please cl ick save button, system goes back to the previous menu.
Figure 2-16
Playback or search in the redundant disk.
There are two ways for you to playback or search in the redundant disk.
Set redundant disk(s) as read-only disk or read- write disk ( Main menu- >Advanced- >HDD
management) . See Figure 2-16.System needs to reboot to get setup activated. Now you can
search or playback file in redundant disk.
Dismantle the disk and play it in another PC.
2.6
Snapshot
Please note the 24/32-channel series product supports 24/32-channel snapshot
function.
2.6.1 Schedule Snapshot
In Encode interface, click snapshot button to input snapshot mode, size , quality and
frequency. See the interface on the left of Figure 2-17.
In FT P ( Main Menu- >Network->Networ k Setting) interface , please input upload interval. See
the interface in the middle of Figure 2-17.
In Schedule interface, please enable snapshot function. See interface on the right of Figure
Please refer to the following figure for detailed infor mation. See Figure 2-17.
