Mobile DVR Installation Instruction Guide
Screw is used to fix the camera or pick-up. Usually we use M5
×
12/ M5
×
14 self tapping screw to fix the
camera and M3
×
8/ M3
×
12 self tapping screw to fix the pickup. You can select according to you actual
environment.
1.4.3 BS Thread Rod and Screw Cap
They are used to fix the device. Usually, we do not need these two accessories. If the installation position
is difficult to choose, maybe you need them.
1.4.4 Protection Coil, Electrical Conduit and Protection Groove
The trunking protection is shown as in Figure 1-1.
Figure 1-1
The tube protection is shown as below. See Figure 1-2.
Figure 1-2
1.5
Preparation
z
Before installation please arrange the installation device and accessories. At the same time, record
the device test and code.
z
The installation group includes: one carriage worker, one electrician, one locksmith, one technical
instructor and one technical engineer from your local retailer.
z
The construction side shall provide the necessary installation condition such as the external power.
z
If necessary, you can complete necessary preparation work, such as put the cable into the bellows).
1.6
Installation Principle
Mobile monitor system installation includes: mobile DVR installation, camera installation, pickup
installation, and cable layout and cable connection.
1.7
Mobile DVR Installation
6