Mobile DVR Installation Instruction Guide
You can paste a label on the HDD box to identify them.
Figure 2-10
2.3
Power Supply
Usually, the mobile DVR shall get power from the vehicle distribution box. The cable shall go through the
fuse of the vehicle. You can refer to the following figure. See Figure 2-11.
Recommended power supply mode:
z
Usually there is radio in the vehicle. The radio power supply is the same with our mobile DVR.
z
You can get power from the keyhole. There is ACC and common power supply of the vehicle
z
For common power, you can get from the vehicle general power button. Please remember adding the
necessary fuse.
Please note, the vehicle supply power shall be larger than the device rated power and can support
the extra large current when system boots up.
Figure 2-11
2.4
Installation Position
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive
substances and etc. At the same time, the installation position can guarantee convenient and reasonable
cable layout.
Please note, you need to reserve a proper distance to draw out the HDD box.
15