15
PRESET
PAN
AUTO SCAN
AUTO CRUISE
AUTO PATTERN
IDLE MOTION
TIME TASK
NEXT PAGE
BACK
EXIT
DIGITAL ZOOM : Off
DIGITAL ZOOM LIMIT :X3
PICTURE FLIP : OFF
FREEZE FUNC : OFF
STABALIZATION: : NORMAL
OUTPUT MODE :1020P/25
CAMERA FACTORY DEFAULT
CAMERA RESTATRT
BACK
EXIT
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
3.4.3.6 Next Page
Move the cursor to NEXT PAGE and then click confirm button, you can go to the submenu.
z
DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.
z
DIGITAL ZOOM LIMIT: It is to set the digital zoom threshold.
z
PICTURE FLIP: This function allows you to turn the image rotation 180 degrees. There are two options:
on/off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
z
FREEZE FUNCTION: This function allows the system from one preset to another preset, without
showing the video during the PTZ movement. There are two options: on/off. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
z
STABALIZATION: It is to remove the risk of the video vibration resulting from the speed dome
movement.
z
OUTPUT MODE: It is to set the video output mode. It includes various options such as 1080P/25,
1080P/30, 720P/25, 720P/30. Please use the left/right button to enable or disable the function.
z
CAMERA FACTORY DEFAULT SETTING: Move the cursor to current item and then click confirm
button to restore factory default setup.
z
CAMERE RESTART: Move the cursor to current item and then click confirm button to reboot the
camera.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
3.4.4 Function Setting
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You can
see the above interface.
z
PRESET: Move the cursor to PRESET and then click confirm button to go to the third submenu.
z
PAN: Move the cursor to PAN and then click confirm button to go to the third submenu.
