Programmable Device Server with I/O Expansion Slot(s)
PDS-8x1 Series User Manual, Version 1.1.2, Apr. 2015
-
68 -
Step 4: Configuring the Pair-connection (Server Mode) on the Web Server for PDS-8x1 #2
1.
Enter the URL address of the PDS-8x1 #2
in the address bar of the browser or click the
“Web”
button in the VxComm Utility to log in to the web configuration page.
2.
Click the
“
COM Port Settings
”
tag to enter the settings page, and select the appropriate
COM
Port number,
Baud Rate and Data Format
settings from the relevant drop down options, for
example
“9600”
, “
8”, “None”
and
1
” .
(Refer to Figure 5-3.4 for illustrations of how to perform the above step 2.)
3.
Check the “
Save current settings to EEPROM
” and “
Apply Current settings
” items, and then
click the
“
SET COM PORT
”
button to finish configuration.
4.
Click
“Set Remote VCOM3 connection”
at the PDS-8x1 #2 (Server) COM PORT setup page.
(Refer to Figure 5-3.5 for illustrations of how to perform the steps 3 and 4.)
5.
Confirm that the Local COM port/Remote COM port area of the
PDS-8x1#2 (Server) is “None”
.
Figure 5-3.9
