ICPDAS MSM-6226G, Console Manual

Page: 207 / 251

< trap port > To set the trap port, the available value is from 1 to 65535.
< severity level > To configure the Severity level, the available value is from 0 to
7.
< 0 > Emergency: system is unusable.
< 1 > Alert: action must be taken immediately.
< 2 > Critical: critical conditions.
< 3 > Error: error conditions.
< 4 > Warning: warning conditions.
< 5 > Notice: normal but significant condition.
< 6 > Informational: informational messages.
< 7 > Debug: debug-level messages.
< security name > Specifies the community access string to use when sending
SNMP trap packets. (Range: Range: 1-32 characters, ASCII characters 33-126
only).
< security level > The security level assigned to the user(1|2|3)
1=> NoauthNoPriv.
2=> AuthNoPriv.
3=> AuthPriv.
< Authentication protocol > The method used for user authentication(1|2)
1=> MD5.
2=> SHA.
< Authentication password > Authentication Password is restricted to 8 - 40.
EXAMPLE
user
To configure SNMP users, the command adds an SNMPv3 user entry.