ICPDAS MSM-6226G, Console Manual

Page: 205 / 251

group
To configure SNMP group, the command adds an SNMPv3 group entry.
Syntax
group <user name> <security model> <group name>
Parameter
< user name > The name of user connecting to the SNMP agent. (Range: 1-32
characters, ASCII characters 33-126 only).
< security model > The user security model. (1|2|3), 1 is (v1), 2 is (v2c), 3 is
(usm).
< group name > The name of the SNMP group. (Range: 1-32 characters, ASCII
characters 33-126 only)
.
EXAMPLE
N
OTE
:
An SNMPv3 group sets the access policy for its assigned
users, restricting them to specific read and write views as
defined by the access entry. You can use the pre-defined
default groups, or create a new group and the views
authorized for that group.
Note that the views assigned to a group must be
specified with the view entry.
v1 : Up to 2 group names can be configured.
V2 : Up to 2 group names can be configured.
usm : Up to 10 group names can be configured.
mode
To enable or disable the SNMP mode.
Syntax
mode <disable/enable>
Parameter
< disable > Disable SNMP mode.
< enable > Enable SNMP mode.