ICPDAS ET-7000 User Manual Download Page 84

Page: 84 / 165

ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 79

Step 1

：

Log in to the PET-7026 web interface

Enter the IP address of the PET-7026 in the browser, and then enter your
user name and password to log in to the PET-7026 web interface. Refer to
chapter 3, “

Web Applications

”, for more details.

Step 2

：

Configure the AO type for the PET-7026

Click the “

Module I/O Settings

” option in the configuration section of the

Main Menu to open the “

analog Output Settings

” page and set the

voltage/current range to “

-5 V - 5V

”, and then click the “

Submit

” button.

(Follow the same procedure to set the AI range for the ET-7017)

Tips & Warnings

The settings for both the AO type for the PET-7026 and the AI type for the
ET-7017 must be the same. In this example, they are both “

-5 V ~ 5 V

”.

Summary of Contents for ET-7000





































































































































































Search results

Summary of Contents for ET-7000

Reviews:

ICPDAS ET-7000, User Manual, Page: 84 / 165

Search results

Summary of Contents for ET-7000

Reviews: