ICPDAS ET-7000 User Manual Download Page 132

Page: 132 / 165

ET-7X00/PET-7X00 User Manual, version 1.1.2 Page: 127

6.4.

Updating the ET-7X00/PET-7X00 Firmware

The firmware is stored in flash memory and can be updated to fix functionality issues or
add additional features, so we advise you to periodically check the ICP DAS web site for the
latest updates.

Step 1

：

Download the latest version of the firmware

ET-7X00

The latest version of the ET-7000 firmware can be obtained from:

CD:\NAPDOS\ET7000_ET7200\firmware\ET7000\

ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/firmware/et70
00/

PET-7X00

The latest version of the PET-7000 firmware can be obtained from:

CD:\NAPDOS\ET7000_ET7200\firmware\PET7000\

ftp://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/firmware/pet7
000/

PET7000_Vx
xx.HEX

ET7000_Vxx
x.HEX

Summary of Contents for ET-7000





































































































































































Search results

Summary of Contents for ET-7000

Reviews:

ICPDAS ET-7000, User Manual, Page: 132 / 165

Search results

Summary of Contents for ET-7000

Reviews: