4.
Once a connection is established, select either the [Default] or the [Wizard]
function from the settings mode page.
5.
Whether you select either the [Default] or the [Wizard] option for
performing configuration, both are used to configure the Pan ID, Node ID,
RF Channel, RF Power, Baud rate, Data Format, Application Mode and so the
relevant parameters.
6.
Once the module configuration has been completed, the message “The
Configuration was successful” will be displayed. Return the DIP switch to the
“ZBRUN” position and reboot the ZT-255x device.
Default
Wizard
4
ICP
DAS,
ZT
‐
2550/ZT
‐
2551
Quick
Start
Guide,
Version
1.2
Page
11
