manualshive.com logo in svg

ICP RS Series, User Manual, Page: 11 / 193

Share
Download
ICP RS Series User Manual Download Page 11

11

J.4.3.1  Menu Advanced Setup: Configure Controller, Controller Settings.............................................. 135
J.4.3.2  Menu Advanced Setup: Configure Controller, Firmware Update ............................................... 136
J.4.3.3  Menu Advanced Setup: Configure Controller, Intelligent Fault Bus........................................... 136
J.4.3.4  Menu Advanced Setup: Conf. Controller, Non-Intelligent Enclosures......................................... 136
J.4.3.5  Menu Advanced Setup: Configure Controller, Advanced Settings.............................................. 138
J.4.3.6  Menu Advanced Setup: Configure Controller, Cluster Settings.................................................. 138
J.4.3.7  Menu Advanced Setup: Configure Controller, Clear Log Buffer ................................................. 138

J.4.4  Menu Advanced Setup: Configure Physical Devices........................................................................... 138

J.4.4.1  Menu Advanced Setup: Configure Phys. Devs., SCSI Parameter /Initialize ................................ 140
J.4.4.2  Menu Advanced Setup: Configure Phys. Devs., Format Disk .................................................... 141
J.4.4.3  Menu Advanced Setup: Configure Phys. Devs., Check Surface.................................................. 141
J.4.4.4  Menu Advanced Setup: Configure Phys. Devs., View Status/Defects......................................... 141
J.4.4.5  Menu Advanced Setup: Configure Phys. Devs., Deinitialize Disk .............................................. 141
J.4.4.6  Menu Advanced Setup: Configure Phys. Devs., Lock/Unlock Disk............................................. 142
J.4.4.7  Menu Advanced Setup: Configure Phys. Devs., Enclosure Status.............................................. 142

J.4.5  Menu Advanced Setup: Configure Logical Drives .............................................................................. 144
J.4.6  Menu Advanced Setup: Configure Array Drives................................................................................. 145

J.4.6.1  Menu Advanced Setup: Configure Array Drives, Change Drive Name ........................................ 146
J.4.6.2  Menu Advanced Setup: Configure Array Drives, Expand Array Drive.......................................... 146
J.4.6.3  Menu Advanced Setup: Configure Array Drives, Add RAID 1 Component................................... 146
J.4.6.4  Menu Advanced Setup: Configure Array Drives, Replace Array Component ................................ 146
J.4.6.5  Menu Advanced Setup: Configure Array Drives, Remove RAID 1 Component ............................. 146
J.4.6.6  Menu Advanced Setup: Configure Array Drives, Remove Array Drive......................................... 147
J.4.6.7  Menu Advanced Setup: Configure Array Drives, Add Hot Fix Drive............................................ 147
J.4.6.8  Menu Advanced Setup: Configure Array Drives, Remove Hot Fix Drive ...................................... 148
J.4.6.9  Menu Advanced Setup: Configure Array Drives, Hot Fix Pool Access.......................................... 148
J.4.6.10  Menu Advanced Setup: Configure Array Drives, Parity Verify ................................................. 148
J.4.6.11  Menu Advanced Setup: Configure Array Drives, Parity Recalculate ......................................... 148
J.4.6.12  Menu Advanced Setup: Configure Array Drives, Build/Rebuild Progress .................................. 148
J.4.6.13  Menu Advanced Setup: Configure Array Drives, Create new Array Drive .................................. 149

J.4.7  Menu Advanced Setup: Configure Host Drives.................................................................................. 150

J.4.7.1  Menu Advanced Setup: Configure Host Drives, Change Drive Name ......................................... 151
J.4.7.2  Menu Advanced Setup: Configure Host Drives, Swap Host Drives............................................. 151
J.4.7.3  Menu Advanced Setup: Configure Host Drives, Remove Host Drives ......................................... 151
J.4.7.4  Menu Advanced Setup: Configure Host Drives, Split Host Drive ............................................... 151
J.4.7.5  Menu Advanced Setup: Configure Host Drives, Merge Host Drives............................................ 151
J.4.7.6  Menu Advanced Setup: Configure Host Drives, Partition Host Drives......................................... 151
J.4.7.7  Menu Advanced Setup: Configure Host Drives, Overwrite Master Boot Code .............................. 151
J.4.7.8  Menu Advanced Setup: Configure Host Drives, Drive Type (Cluster).......................................... 151

K.  ICP RAID Navigator ................................................................................................................................... 155

Summary of Contents for RS Series


































































































































































































Reviews:

No comments