2.2.1 Jumper Setting
JP1/JP2 Jumper setting (for
ISO-P32C32
):
External
Power
Internal
Power
Default Setting
JP1: CON1 Internal power/External selection.
JP2: CON2 Internal power/External selection.
IRQ selection
: JP3 for
ISO-P32C32
JP1 for
ISO-P32S32W
N.C 15 14 12 11 10 9 7 6 5 4 3 N.C
Default IRQ: N.C (Not use IRQ)
Select IRQ one of the 3/4/5/6/7 for D/I channel 16 of CON1.
Select IRQ one of the 9/10/11/12/14/15 for D/I channel 0 of CON2.
Usage:
Step 1: Select IRQ 3/4/5/6/7 for channel 16.
Step 2: Select IRQ 9/10/11/12/14/15 for channel 0.
Step 3: Input interrupt signals by way of channel 0/16 of CON2/CON1.
Step 4: Run P32Cint.EXE used interrupt function for ISO-P32C32/
P32S32W card.
Step 5: Select I/O Base address of ISO-P32C32/P32S32W card.
Step 6: Input IRQ number (Refer to JP3 setting of P32C32 board,
JP1 setting of P32S32W board).
ISO
-P32C32/P32S32W/P64/C64 User Manual (Ver.1.9, Oct. 2011, IMH-000-19)
11
