manualshive.com logo in svg

ICP ICPCON, User Manual

The ICP ICPCON user manual offers comprehensive guidance for operating and utilizing this exceptional product. This informative manual is available for free download at manualshive.com, allowing you to conveniently access it and enhance your user experience. Empower yourself with the necessary knowledge to maximize the potential of your ICP ICPCON device through this user-friendly manual.

Share
Download
background image

8

I.4.5  Menu Advanced Setup: Configure Logical Drives ..................................................................................35
I.4.6  Menu Advanced Setup: Configure Array Drives.....................................................................................36

I.4.6.1  Menu Advanced Setup: Configure Array Drives, Change Drive Name ............................................37
I.4.6.2  Menu Advanced Setup: Configure Array Drives, Expand Array Drive..............................................37
I.4.6.3  Menu Advanced Setup: Configure Array Drives, Add RAID 1 Component .......................................37
I.4.6.4  Menu Advanced Setup: Configure Array Drives, Replace Array Component ....................................37
I.4.6.5  Menu Advanced Setup: Configure Array Drives, Remove RAID 1 Component .................................37
I.4.6.6  Menu Advanced Setup: Configure Array Drives, Remove Array Drive.............................................38
I.4.6.7  Menu Advanced Setup: Configure Array Drives, Add Hot Fix Drive................................................38
I.4.6.8  Menu Advanced Setup: Configure Array Drives, Remove Hot Fix Drive ..........................................39
I.4.6.9  Menu Advanced Setup: Configure Array Drives, Hot Fix Pool Access..............................................39
I.4.6.10  Menu Advanced Setup: Configure Array Drives, Parity Verify .....................................................39
I.4.6.11  Menu Advanced Setup: Configure Array Drives, Parity Recalculate .............................................39
I.4.6.12  Menu Advanced Setup: Configure Array Drives, Build/Rebuild Progress ......................................39
I.4.6.13  Menu Advanced Setup: Configure Array Drives, Create new Array Drive ......................................40

I.4.7  Menu Advanced Setup: Configure Host Drives......................................................................................41

I.4.7.1  Menu Advanced Setup: Configure Host Drives, Change Drive Name .............................................42
I.4.7.2  Menu Advanced Setup: Configure Host Drives, Swap Host Drives.................................................42
I.4.7.3  Menu Advanced Setup: Configure Host Drives, Remove Host Drives .............................................42
I.4.7.4  Menu Advanced Setup: Configure Host Drives, Split Host Drive....................................................42
I.4.7.5  Menu Advanced Setup: Configure Host Drives, Merge Host Drives................................................42
I.4.7.6  Menu Advanced Setup: Configure Host Drives, Partition Host Drives.............................................42
I.4.7.7  Menu Advanced Setup: Configure Host Drives, Overwrite Master Boot Code ..................................42
I.4.7.8  Menu Advanced Setup: Configure Host Drives, Drive Type (Cluster)..............................................42

II.  ICP RAID Navigator.......................................................................................................................................44

II.1  Introduction ..........................................................................................................................................44
II.2  The ICP RAID Navigator "Controls"...........................................................................................................45

II.2.1  The Toolbar.....................................................................................................................................45
II.2.2  The Status Bar ................................................................................................................................45
II.2.3  "Window" Menu Commands .............................................................................................................45
II.2.4  "Help" Menu Commands..................................................................................................................46
II.2.5  "File" Menu Commands....................................................................................................................46
II.2.6  "View" Menu Commands..................................................................................................................46
II.2.7  The "Chart" Menu............................................................................................................................47
II.2.8  The "Configuration" Menu Commands................................................................................................47

II.3  Select Controller ....................................................................................................................................48
II.4  Physical Configuration Window ...............................................................................................................48

II.4.1  Controllers ......................................................................................................................................49
II.4.2  I/O Processors.................................................................................................................................51
II.4.3  Direct Access Devices........................................................................................................................52

Summary of Contents for ICPCON














































































Reviews:

No comments

Related manuals for ICPCON

F-SECURE Mobile Anti-Virus 60 Series User Manual preview
Mobile Anti-Virus 60 Series
Brand: F-SECURE Pages: 90
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
Access ATOMIZER Operator'S Manual preview
ATOMIZER
Brand: Access Pages: 16
Baby Lock Baby Lock Embroidery Professional PLUS Instructions preview
Baby Lock Embroidery Professional PLUS
Brand: Baby Lock Pages: 5
MACROMEDIA COLFUSION MX 7-GETTING STARTED BUILDING COLDFUSION... Getting Started preview
COLFUSION MX 7-GETTING STARTED BUILDING COLDFUSION...
Brand: MACROMEDIA Pages: 152
Extreme Networks Ridgeline 3.0 Installation Manual preview
Ridgeline 3.0
Brand: Extreme Networks Pages: 60
Velocity SEAL-IT SEAL-IT 100 User Manual preview
SEAL-IT SEAL-IT 100
Brand: Velocity Pages: 38
Canon VK-16 User Manual preview
VK-16
Brand: Canon Pages: 156
Canon BJC-S830D Application Manual preview
BJC-S830D
Brand: Canon Pages: 139
Blackberry PRD-07630-011 - Enterprise Server - PC Manual preview
PRD-07630-011 - Enterprise Server - PC
Brand: Blackberry Pages: 69
Asus Z87M-PLUS User Manual preview
Z87M-PLUS
Brand: Asus Pages: 164
TANDBERG MOVI 4.0 - User Manual preview
MOVI 4.0 -
Brand: TANDBERG Pages: 19
TANDBERG MPS API User Manual preview
MPS API
Brand: TANDBERG Pages: 84
TANDBERG Gatekeeper/Border Controller User Manual preview
Gatekeeper/Border Controller
Brand: TANDBERG Pages: 84
HP D530 - Compaq Business Desktop Reference Manual preview
D530 - Compaq Business Desktop
Brand: HP Pages: 77
HP Data Protector Manual preview
Data Protector
Brand: HP Pages: 60
HP Data Protector A.06.1x Overview preview
Data Protector A.06.1x
Brand: HP Pages: 2
HP dc5700 - Microtower PC Troubleshooting Manual preview
dc5700 - Microtower PC
Brand: HP Pages: 71

Brands by name

Popular brands

Load more brands