Hardware Installation and User’s Guide
9
Getting Started
Français
Ce produit est conforme aux exigences de la Directive Européenne 89/336/EEC
& 73/23/EEC.
Deutsch
Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 89/
336/EEC & 73/23/EEC.
Icelandic
Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 89/336/
EEC & 73/23/EEC.
Italiano
Questo prodotto è conforme alla Direttiva Europea 89/336/EEC & 73/23/EEC.
Norsk
Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 89/336/
EEC & 73/23/EEC.
Portuguese
Este produto cumpre com as normas da Diretiva Européia 89/336/EEC & 73/
23/EEC.
Español
Este producto cumple con las normas del Directivo Europeo 89/336/EEC & 73/
23/EEC.
Svenska
Denna produkt har tillverkats i enlighet med EG-direktiv 89/336/EEC & 73/23/
EEC.
1.5
Warnings and Cautions
This guide and all associated guides in the user documentation set (the Quick Start Guide,
the Hardware Guide, and the Software Guide) should be used by qualified technical
personnel with experience installing and configuring PCI controllers.
Read and adhere to all warnings, cautions, and notices in this guide and all the guides in
the
user documentation set
supplied with this product.
Warnings
•
The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC certification of this device and may cause interference levels that
exceed the limits established by the FCC for this equipment. It is the responsibility of
the user to obtain and use a shielded equipment interface cable with this device. If the
equipment has more than one interface connector, do not leave cables connected to
unused interfaces unless otherwise instructed to do so in the user manual.
•
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
Cautions
•
Take precautions to prevent electrostatic discharge (ESD) damage before handling the
ICP RAID controller.
•
ESD can damage controller components. Perform the described procedures in this
guide only at an ESD workstation. If no such station is available, you can provide some
