background image

31 

 

Audio Low DMA Select

 

-- DMA0, DMA1, DMA3, Disabled

 

To select the high DMA channel.

 

 

Audio High DMA Select

 

-- DMA5, DMA6, DMA7, Disabled

 

To select the high DMA channel.

 

 

Multiple Monitor Support -- No Onboard, PCI first, M/B first

 

To select the primary VGA for multiple monitor support in WINDOWS.

 

 

Video Memory Size -- 1.5M, 2.5M, 4.0M

 

To select the size of Video memory. It makes use of system memory for 
display.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

32 

4.10 SUPERVISOR PASSWORD AND USER PASSWORD 

Supervisor Password sets a password that is used to protect 
your system and Setup Utility. Supervisor Password has 
higher priority than User Password. Once you setup the 
password, the system will always ask you to key-in password 
every time you enter the BIOS SETUP. If you enter the BIOS 
SETUP with Supervisor Password, you can choose every 
setup/option on the main menu but with User Password, you 
can only choose three setup/options (USER PASSWORD, 
SAVE & EXIT SETUP and EXIT WITHOUT SAVING). To 
disable these passwords, enter the BIOS SETUP room with 
Supervisor Password and then just press the <Enter> key 
instead of entering a new password when the 'Enter 
Password' prompts pop-up. 

 

N.B. : if you forget the password, do the Clear/Reset CMOS procedure (see 

Section 2.5 Clear CMOS Setup) 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for WAFER-5825

























Reviews: