35
4.10 SUPERVISOR PASSWORD AND USER
PASSWORD
Supervisor Password sets a password that is used
to protect your system and Setup Utility. Supervisor
Password has higher priority than User Password.
Once you setup the password, the system will always
ask you to key-in password every time you enter the
BIOS SETUP. If you enter the BIOS SETUP with
Supervisor Password, you can choose every
setup/option on the main menu but with User
Password, you can only choose three setup/options
(USER PASSWORD, SAVE & EXIT SETUP and
EXIT WITHOUT SAVING). To disable these
passwords, enter the BIOS SETUP room with
Supervisor Password and then just press the
<Enter> key instead of entering a new password
when the 'Enter Password' prompt pop-up.
N.B.: if you forget the password, do the
Clear/Reset CMOS procedure (see Section 2.5
Clear CMOS Setup)
Summary of Contents for WAFER-5821
Page 11: ...11 WAFER 5821 Geode Cx5530A...
