40
Offboard PCI IDE Card >
to specify if an offboard PCI IDE card is
installed in your computer or not. You must specify the slot
number on the board which will be used for the card.
Offboard PCI IDE Primary (/Secondary) IRQ >
to specify the
PCI interrupt that is assigned to the Primary (/Secondary) IDE
channel on the offboard PCI IDE controller.
Assign IRQ to PCI VGA >
to assign IRQ to PCI VGA
PCI Slot (1,2,3,4) IRQ Priority >
to specify the IRQ priority to be
used by the PCI devices on slot 1 to 4.
DMA Channel (0,1,3,5,6,7) >
to indicate whether or not the DMA
channel is assigned for a PnP or ISA card.
IRQ (3,4,5,7,9,10,11,14,15) >
to assign the displayed IRQ to be
used by a legacy ISA adapter card. The settings are ISA/EISA or
PCI/PnP.
4.7 Peripheral Setup
This setup is working mostly on Multi-I/O Chip. The options are
used to change the Chipset‘s registers. Please carefully change
any default setting to meet your application need perfectly. The
only special concern is Onboard Serial Port 2. If you want to use
the IrDA port, you have to configure the SIR or ASKIR model in the
BIOS’s Peripheral Setup’s COM2; the RS-232 COM2 will be
disabled.
Summary of Contents for POS-566
Page 2: ......
Page 10: ...8 2 1 POS 566 s Layout ...
