42
Onboard Serial PortD >
to specify the I/O port address of the
serial portC. If you set it Auto, the BIOS will decide the correct I/O
port address, automatically.
Serial PortD Mode >
to specify the mode of serial port 2.
IrDA Protocol >
to specify the function mode if an IrDA mode is
selected.
Serial PortD IRQ >
to assign IRQ to be used by Serial PortD IRQ.
Onboard Parallel Port2 >
to specify the I/O port address of the
parallel port2.
Parallel Port2 Mode >
to specify the mode of parallel port2. The
options are:
Normal
(normal parallel port mode),
Bi-Dir
(supports bidirectional transfer),
EPP
(supports devices that comply with the Enhanced Parallel
Port specification),
ECP
(supports devices that comply with the Extended Capabilities
Port).
Parallel Port2 IRQ >
to assign certain IRQ to the parallel port.
Parallel Port2 DMA Channel >
available only if the parallel port
mode is ECP.
DIO address >
to assign memory address to Digital I/O.
LCD/CRT Selection >
to specify the display device. Options: LCD,
CRT, Both or Auto.
LCD Type >
to set LCD type. There are 15 types available. The
followings are the available list of LCD panels:
#1 1024 x
768
STN
#2 1280 x
1024 TFT
#3 640 x
480 STN
#4 800 x
600 STN
#5 640 x
480 TFT
#6 640
x
480
18bit <
(choose this one for the LCD)
#7 1024 x
768 TFT
#8 800 x
600 TFT
#9 800 x
600 TFT
#10 800 x
600 TFT
Summary of Contents for POS-566
Page 2: ......
Page 10: ...8 2 1 POS 566 s Layout ...
