14
Connection
This chapter describes how to connect peripherals, switches
and indicators to the JUKI-511P board.
3.1 LCD Interface Connector (CN1)
The JUKI-511P provides a 2x25-pin connector CN1, for the
LCD flat panel interface and the LVDS interface.
The JUKI-511P comes to support TFT LCD panels at
following display options: (This is a reference table only,
may support more type panels)
Video Display type Resolution
Example
TFT VGA
640X480, 64K Color, 18bits
Toshiba LTM10C209A
TFT VGA
640X480, 64K Color, 18bits
PRIME VIEW P46CV1
TFT VGA
640X480, 64K Color, 18bits
NEC NL6448AC33-18
TFT SVGA
800X600, 64K Color, 18bits
IMES M121-53H
TFT SVGA
800X600, 64K Color, 18bits
Toshiba LTM12C289A
TFT SVGA
800X600, 64K Color, 18bits
Toshiba LTM12C275A
TFT XGA
1024X768,64K Color,18bits
NEC
NL10276AC30-04R
The display options need to be setup manually from BIOS.
The BIOS “
Integrated Peripheral
” Setup will allow you to
choose display resolution either 640X480 , 800X600 or
1024X768.
LCD Interface Connector – only support up to 18 bits
TFT-LCD. For better display quality, the length of LCD cable
should be shorter than 35 cm.
3
15
•
CN1: 50-pin LCD Connector
PIN
NO.
Description
PIN
NO.
Description
1 N/C
2 N/C
3 N/C
4 N/C
5 N/C
6 N/C
7 N/C
8 N/C
9 N/C
10 N/C
11 N/C
12 N/C
13 N/C
14 RED3
15 RED5
16 RED4
17 N/C
18 RED2
19 N/C
20 RED0
21 RED1
22 GREEN4
23 GREEN3
24 GREEN2
25 GREEN5
26 GREEN1
27 BLUE5
28 GREEN0
29 FPVCC
30 FPVCC
31 N/C
32 N/C
33 BLUE2
34 BLUE4
35 BLUE1
36 BLUE3
37 BLUE0
38 N/C
39 M
40 N/C
41 SHFCLK
42 ENABKL
43 FPVCC
44 FLM
45 FPVEE
46 LP
47 GROUND
48 GROUND
49 +12V
50 +12V
