40
SVGA Setup
5.1 Introduction
The JUKI-511P is equipped with on-board LCD/VGA interface.
The description below is its specifications and features:
5.1.1 Chipset
The JUKI-511P uses a Cyrix CS5530A chipset as its
SVGA controller. It is compatible with many common 18-bit
LCD displays and traditional analog CRT monitors. The
VGA BIOS supports LCD. Besides, it also accepts
interlaced and non-interlaced analog monitors (color and
monochrome VGA) with high-resolution quality while
maintaining complete IBM VGA compatibility. But digital
monitors (i.e. MDA, CGA, and EGA) can be NOT
supported. Multiple frequency (multisync) monitors are
operated as if they were analog monitors.
5.1.2 Display memory
Having 1.5 ~ 4 MB UMA memory, the VGA controller
can make CRT displays or color panel displays perform
with resolutions up to 1024 x 768 at 64 K colors. The
display memory can be modified up to 4 MB in BIOS for
true-color resolution of 1024 x 768.
5
41
5.1.3 Display drivers
1. Win95, 98 drivers (VGA & Audio) in
\VGA\MediaGX\National Geode Win9x Drivers 1.2
2. WinNT4.0,Windows 2000 driver in
\VGA\MediaGX\Nt40Vga\
5.2 Further Information
For more detailed information about the PCI/SVGA installation
in your JUKI-511P, including driver updates, troubleshooting
instructions, please refer to the following webs, which provide
some resources you may need. If not find the information you
need, please contact with your local contributor or ICP support
team:
ICP web site:
www.iei.com.tw
