ICP DAS USA ZT-2018/S, Quick Start Manual

Page: 3 / 8

ICP DAS, ZT-2018/S Quick Start, Version 1.0.0
Page 3
Copyright
©
2013 by ICP DAS Co., Ltd. All Rights Reserved.
4
The Rotary Switch and DIP Switches
The configuration of the ZT-2018/S can be adjusted using a combination of the external
rotary switch and the DIP switches. The ZT-2000 device should only be rebooted once the
configuration is completed.

ZT-2018/S

Rotary Switch
0
(Software Config.)
1 2 3
……
F Note
Address *Note 1 01 02 03
……
0F
MSB = 0
Node ID *Note 1 0x0001 0x0002 0x003
……
0x000F
0 1 2 3
……
F
Address 10 11 12 13
……
1F
MSB = 1
Node ID 0x0010 0x0011 0x0012 0x013
……
0x001F
*Note 1
： The “ Address ” and “ Node ID ” are defined via the %AANNTTCCFF command. In software
configuration mode, the DIP switches for “ Address ” , “ Data Format ” and “ Type Code ”
are ignored and can also be set via the %AANNTTCCFF and $AA7CiRrr commands.
1 2 3 4 5 6 7 8 9 10 11 12
Address LSB
(Node ID)
Address MSB
(Node ID)
Protocol
Checksum
ZB PID
ZB Channel
Type Code
ON
Data Format