ICP DAS, ZT-2005-C8 User Manual, Version v1.0.1 Page 25
Copyright © 2014 by ICP DAS Co., Ltd. All Rights Reserved.
5.2.7
$AA1Ci
Description
Performs an Analog Input Span Calibration of a Specific Channel on the
Module.
Syntax
$AA1Ci[CHKSUM](CR)
$
Delimiter character
AA
The address of the module to be trimmed in hexadecimal format
(01 to FF)
1
Command for span calibration.
Ci
The Analog Input channel, zero based.
Response
Valid Command
!AA[CHECKSUM](CR)
Invalid Command ?AA[CHECKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate a invalid command
AA
The address of the responding module in hexadecimal format (01 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples
Command $011C0
Response !1B
Performs span calibraction of channel 1 in address 01, and returns a
response indicating that the command was successful.
Examples
Command $1B1C5
Response !1B
Performs span calibraction of channel 6 in address 27, and returns a
response indicating that the command was successful.
Examples
Command $1C1C1
Response ?1C
Performs span calibraction of channel 2 in address 28, and returns a
response indicating that the command was not successful. Because the
module don
’
t perform
“
Enabled/Disabled calibraction
”
command.
※
Related Commands: $AA0Ci
、
~AAEV
