ZB-2510 Series User Manual, Ver. 1.2 Page 25
2. The ZB-2510 Series default settings:
Pan ID
00 01
Node ID
00 01
RF Channel
1
Network Presence Detection Time
Interval
20 sec
Route Paths Options
Broadcast Mode
3.
Network Status Detection Time Setting:
If setting value is 20, it means every 20 seconds a packet will be send to
confirm the status of the network. If communication is disconnected,
then self-recovery of the network will occur, if the value is set to 0, the
mechanism will be turned off.
4.
Route Path Options:
Broadcast mode is automatically builds the network. User-defined Route
mode builds the network based on the main route path or the back-up
route path.
Broadcast Mode:
User-defined Route Mode: