background image

ICP DAS CO., LTD. 

 

User Manual, Ver. 1.3, Apr. 2018, Page: 1

 

 

tM-752N Series  

User Manual

 

 

Tiny Addressable Serial Converter 

Ver. 1.3/ Apr. 2018 

 
 
 
 
 
 

 

 

S

UPPORTS

 

Module includes tM-7521 and tM-7522. 

 

W

ARRANTY

 

All products manufactured by ICP DAS are warranted against defective 
materials for a period of one year from the date of delivery to the 
original purchaser. 

 

W

ARNING

 

ICP DAS assumes no liability for damages consequent to the use of this 
product. ICP DAS reserves the right to change this manual at any time 
without notice. The information furnished by ICP DAS is believed to be 
accurate and reliable. However, no responsibility is assumed by ICP DAS 
for its use, nor for any infringements of patents or other rights of third 
parties resulting from its use. 

 

C

OPYRIGHT

 

Copyright © 2017 by ICP DAS. All rights are reserved. 

 

T

RADEMARK

 

Names are used for identification only and may be registered 
trademarks of their respective companies. 

 

C

ONTACT 

U

S

 

If you have any question, please feel to contact us. We will give you 
quick response within 2 workdays.  
Email: [email protected], [email protected]

 

 

Summary of Contents for tM-752N Series



































































Reviews: