TPM-4100/TP-4100 Touch Panel Monitor User Manual
, version 1.0.0
,
Last Revised: June 2012 Page: 52
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.3.1.1. Installation for XP-8000
Follow the steps below to install the PenMount universal touch driver.
There is a
RS-232 cable in the shipping package
(Sec.1). The user can use this
cable to
connect TPM-4100/TP-4100 with COM5 to use serial touch driver
directly
. If the user wants to use other com port, please note the pin assignment.
About the pin assignment, please refer to the user manual of the XP-8000.
1.
Go to CD-ROM to copy the driver to XP-8000.
“PenMount Windows Universal Driver Vx.x.x.x” folder can be obtained from:
CD: \TPM-4100_TP-4100\Driver\Win_XP_Embedded\XP-8000 device\
2.
Executing XPAC Utility to disable EWF on desktop.
COM5