TPM-4100/TP-4100 Touch Panel Monitor User Manual
, version 1.0.0
,
Last Revised: June 2012 Page: 29
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.1.2.1. Installation for WinPAC-8000 and WinPAC-5000
Follow the steps below to install the PenMount serial touch driver.
The default COM
port is COM4 for serial touch driver
.
1.
Go to CD-ROM to copy the driver to WinPAC.
PM6000_Serial_TOUCH_Vyyyymmdd.CAB driver can be obtained from:
CD:\TPM-4100_TP-4100\Driver\WinCE\V5.0\WP-8000 and WP-5000
device\
Or go to “\System_Disk\External_device_driver\” in the WinPAC.
2.
Double click “PM6000_Serial_TOUCH_Vyyyymmdd.CAB”
COM4
WinPAC-5000 doesn’t have
COM4, please refer to “Change
the COM port” of Sec.2.1.2.2 to
change COM port to specified
COM port
.
