TxRxCAN_IRQ:
In demo 2, we provide a demonstration on how to send out a CAN
message through port 1 and receive the CAN message in port 2 by means of
the interrupt mode. Contained within this operation, the user can key in the
CAN message into the port 1 frame area and click on the “Send” button to
send out the CAN message. At the same time, the CAN message will be
received at port 2 by means of the interrupt mode. As shown in the following
figure, port 2 can automatically receive the CAN message and store it within
the 4K bytes of buffer software. When the user clicks the “Receive” button, all
the messages stored in the 4K bytes buffer will all be presented in the TEXT
edit area, as shown in the following figure.
PISO-CAN/PEX-CAN/PCM-CAN Series User’s Manual (v2.6 Dec/2013) -------
74
Figure 5.2: The form of demo2 program
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru