2.3
Connector Pin Assignment
The PISO-CAN200/400-T and PISO-CAN100U/200U/400U-T, and
PEX-CAN200i-T are equipped with 1/2/4 sets of
5-pin screw terminal
connectors,
the PISO-CAN200/400-D and PISO-CAN100U/200U/400U-D,
PEX-CAN200i-D and PCM-CAN100/200 are equipped with 1/2/4 sets of
9-pin
male D-sub connectors
for wire connection of the CAN bus. And the
PISO-CAN800U is equipped with 2 sets of female DB-37 connector. Via the
CA-9-3715D/CA-9-3705
cable, user can convert the female DB-37 connector
to
9-pin male D-sub connectors.
The connector’s pin assignment is specified
as follows:
2.3.1 5-pin screw terminal connector
The 5-pin screw terminal connector of the CAN bus interface is shown in
Figure 2.8. The details for the pin assignment are presented in Table 2.7.
Figure2.9 5-pin screw terminal connector
Table 2.7 Pin assignment of 5-pin screw terminal connector
5-pin screw terminal connectors pin
assignment
CAN_GND
1
CAN_L
2
CAN_SHLD
3
CAN_H
4
PISO-CAN/PEX-CAN/PCM-CAN Series User’s Manual (v2.6 Dec/2013) -------
22
5
Reserved
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
