PIO-D96 Series Card
96-channel DIO Board
User Manual, Ver. 2.3, Jun. 2018, PMH-008-23 Page: 36
PIO_PISO.EXE Utility
The
PIO_PISO.EXE
utility is valid for all PIO/PISO cards. This program shows all PCI hardware ID
regarding the PIO and PISO series DAQ cards. It is useful to test if the card Plug & Play successfully
when the computer bootup. If the PIO or PISO series card does not shown in the screen correctly,
please try to use another PCI slot and try again.
The user can execute the
PIO_PISO.EXE
to get the following information:
List all PIO/PISO cards installed in this PC
List all resources allocated to every PIO/PISO cards
List the wSlotBus and wSlotDevice for specified PIO/PISO card identification. (refer to
Section
6.2 “The Assignment of I/O Address”
for more information about the assignment of I/O
Address)
For Windows OS
The
PIO_PISO.EXE
utility is located on the CD as below and is useful for all PIO-DIO series boards.
(CD:\NAPDOS\PCI\Utility\Win32\PIO_PISO\)
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/utility/win32/pio_piso/