PIO-D96 Series Card
96-channel DIO Board
User Manual, Ver. 2.3, Jun. 2018, PMH-008-23 Page: 20
4.
Software Installation
This chapter provides a detailed description of the process for installing the PIO-D96 series driver
and how to verify whether the PIO-D96 was properly installed. PIO-D96 series card can be used on
DOS, Linux and 32/64-bit XP/2003/2008/7/8/10 based systems, and the drivers are fully Plug and
Play (PnP) compliant for easy installation.
4.1
Obtaining/Installing the Driver Installer
Package
The driver installation package for PIO-D96 series board can be found on the companion CD-ROM,
or can be obtained from the ICP DAS FTP web site. Install the appropriate driver for your operating
system. The location and website addresses for the installation package are indicated below.
UniDAQ Driver/SDK
(It is recommended to install this driver for new user.)
OS
Windows 2000, 32/64-bit Windows XP, 32/64-bit Windows 2003,
32/64-bit Windows Vista, 32/64-bit Windows 7, 32/64-bit Windows 2008,
32/64-bit Windows 8, 32/64-bit Windows 10
Driver Name
UniDAQ Driver/SDK (unidaq_win_setup_xxxx.exe)
CD-ROM
CD:\\ NAPDOS\PCI\UniDAQ\DLL\Driver\
Web Site
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
Installing
Procedure
To install the UniDAQ driver, follow the procedure described below.
Step 1: Double-click the UniDAQ_Win_Setupxxx.exe icon to begin the installation
process.