The setup program will then start the driver installation and copy the relevant
files to the specified directory and register the driver on your computer. The
directory where the drive is stoned is different for different windows versions, as
shown below.
Windows 64-bit Windows XP/2003/Vista/7:
The UniDAQ.DLL file will be copied into the
C:\WINNT\SYSTEM32 folder
The NAPWNT.SYS and UniDAQ.SYS files will be copied into the
C:\WINNT\SYSTEM32\DRIVERS
folder
For more detailed UniDAQ.DLL function information, please refer to
UniDAQ SDK user manual (CD:\NAPDOS\PCI\UniDAQ\Manual\).
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/maunal/
Windows NT/2K and 32-bit Windows XP/2003/Vista/7:
The P16R16.DLL file will be copied into the C:\WINNT\SYSTEM32 folder
The NAPWNT.SYS and P16R16.SYS files will be copied into the
C:\WINNT\SYSTEM32\DRIVERS folder
Windows 95/98/ME:
The P16R16.DLL and Nappci.Vxd files will be copied into the
C:\Windows\SYSTEM folder
!
!
For more detailed P16R16.DLL function information, please refer to
“PCI-P16R16 Series Software Manual.pdf” (CD:\NAPDOS\PCI\PCI-
P16R16\Manual\).
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-
3.2 PnP Driver Installation
Power off the computer and install the PCI-P8R8/P16R16/P16C16/
P8POR8P16POR16 and PEX-P8POR8i/P16POR16i cards.
Turn on the
computer and Windows 98/ME/2K and 32-bit/64-bit Windows XP/2003/Vista/7
should automatically defect the new PCI device(s) and then ask for the location
of the driver files for the hardware. If a problem is encountered during
installation, refer to the
PCI-P16R16_PnP_Driver_Installation.pdf
(CD:\NAPDOS\PCI\PCI-P16R16\Manual\) for more information.
PCI-P16R16 Series User Manual (Ver.2.8, Apr. 2011, PMH-013-28)
26