PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 11
2.
Hardware Configuration
2.1
Board Layout
Figure 2.1 and Figure 2.2 shows the layout of the PEX-1002L/H and PCI-1002LU/HU boards and the
locations of the configuration jumper and connector for signal wiring.
PEX-1002L/H
PEX-1002H
CON2
CON
2
SW1
1 2 3 4
CON
1
JP1
VR3
VR2
VR1
PEX-1002L
JP2
CON1
16-channel Digital Output
Refer to
Section 2.8 “Pin Assignments”
for
more details.
CON2
16-channel Digital Input
CON3
The terminal for the AD and DA converters for
voltage input/output
SW1
Card ID function
Refer to
Section 2.4 “Card ID Switch”
for more
details.
JP1
Analog input type selection
Refer to
Section 2.2 “JP1: AD Input Type
Selection”
for more details.
VR1/VR2/VR3
AD Calibration
Refer to
Section 2.3 “VR1/VR2/VR3: AD
Calibration”
for more details.
JP2
Pull-high/pull-low jumper for DI
Refer to
Section 2.5 “JP2: DI Port Settings
(Pull-High/Low)”
for more details.
Figure 2-1
