PCI-1002 Series Card
12-bit, 110 kS/s or 44 kS/s Multi-function Board
User Manual, Ver. 3.0, Jun. 2018, PMH-015-30, Page: 38
5.2
Launch the Test Program
The following example use UniDAQ driver to perform self-test. If you install the PCI-1002 series
classic driver, please refer to Quick Start Guide of the PCI-1002
(
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-1002/manual/quickstart/classic/
) to
execute the self-test.
Step 1:
Double-click the
UniDAQ Utility
software.
The UniDAQ Utility will be placed in the
default
path “C:\ICPDAS\UniDAQ\Driver”
after completing installation.
Step 2:
Confirm that your board has been successfully
installed in the Host system.
Note that the device
number starts from 0
.
Step 3:
Click the
“TEST”
button to start the test.
Note:
The PEX-1002L/H and PCI-1002LU/HU software is fully
compatible with the PCI-1002L/H series software.
