M-7011 1-channel Thermocouple input DAQ Module - QuickStart (Oct/2019)
ICP DAS USA, Inc.
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
5
7. For M-7000 modules, DCON utility pro terminal can send command to the module.
See user manual Sections 2 for details command.
Configure the module: sending the %AANNTTCCFF command. See Section 2.1 for
details. To configure the M-7005, the $AA7CiRrr command must also be sent. See user
manual Section 2.12 for details. For M-7000 modules using the Modbus RTU protocol,
configure the module using the following functions.
-Sub-function 04h of Function 46h, see user manual Section 3.6.2
-Sub-function 06h of Function 46h, see user manual Section 3.6.4
-Sub-function 08h of Function 46h, see user manual Section 3.6.6
Read data from the input channels: send either the #AA or #AAN commands to the
module. See user manual Sections 2.3 and 2.4 for details. For M-7000 modules using
the Modbus RTU protocol, use Function 04h to read the data from the input channels.
See user manual Section 3.3 for details.
