ICP DAS USA LC-101H, User Manual

Page: 32 / 35

LC-101H/LC-102H User Manual
-
32 -
digital input channel, h is a hexadecimal value, where bit 0
corresponds to channel 0 and bit 1 corresponds to channel
1. Channel 1 is only for LC-102H. For each bit, 0 denotes
no dependency and 1 for dependency.
$AALC1 Read the dependency of the digital output channel on the
digital input channel.
response:
!AAh
$AALC2hhhh Set the no operation time on power-on of the digital output
channels, where hhhh is four digit hexadecimal value in
ms.
$AALC3 Read the no operation time on power-on of the digital
output channels.
response:
!AAhhhh
$AAM read module name
Command Description
$AAP Read Modbus RTU/DCON protocol
response:
!AA0 -> DCON
!AA1 -> Modbus RTU
$AAPN Set Modbus RTU/DCON protocol
N-> 0: DCON, 1: Modbus RTU
$AAS1 Reload factory calibration parameters.
#** Instruct the module to read digital input/output data and
store the data to be retrieved by the $AA4 command.
#AA Read all analog inputs
response
> (channel 0 current) for LC-101H
> (channel 0 current)(channel 1 current) for
LC-102H
Data format SDD.DDD, where S is sign '+' or '-' and D is
decimal digit
#AAN Read digital input counter value of a channel
N = 0 for LC-101H, 0 and 1 for LC-102H
response