ICP DAS USA LC-101H, User Manual

Page: 31 / 35

LC-101H/LC-102H User Manual
-
31 -
Appendix C: DCON Command Sets
Command Description
$AA0CN Span calibration of an analog input channel, N is 0 for
LC-101H and 0 or 1 for LC-102H. Span calibration current
is 5A.
$AA1CN Zero calibration of an analog input channel, N is 0 for
LC-101H and 0 or 1 for LC-102H. Zero calibration current
is 0.1A.
$AA2 read configuration
$AA4 Read the synchronized data that was retrieved by the last
#** command.
response
> SOI0000, S is 1 for the first read and 0 for not the
first read
$AA5 read reset status
!AA1 first after power on, !AA0 others
$AA6 Read the digital output and input status
response
> 0O0I00, where O is digital output and I is digital input
$AAC Clear the status of the latched digital input and output
channels.
$AACN Clear the counter value of a digital input channel, N is 0 for
LC-101H and 0 or 1 for LC-102H.
$AAF read firmware version
$AAI read INIT status
response:
!AA0 -> INIT short to GND
!AA1 -> else
$AALS Read the status of the latched digital output and input
channels,
S is 0 to read the low latched status and 1 to read the high
latched status.
response:
!0O0I00
$AALC0h Specify the dependency of the digital output channel on the