P6
4
LED indicators
The module provides one LED indicator. The table below will show the LED status.
Indicators
Status
Instructions
STA
500ms
Blink
continuous
Illegal Node ID, please set the Node ID
to 1~31, and then power on.
Blink twice
Component status is abnormal.
1.
Please confirm whether the audio
line of “Ext_Bus” is fully inserted and
the module is power off. And power
on after press “Wake” and “F3”
buttons for 5 seconds.
1.
If have any questions, please contact
technology support.
Blink three
times
Unable to confirm sensor type.
1.
Please confirm whether the audio
line of “Ext_Bus” is fully inserted and
the module is power off. And power
on after press “Wake” and “F3”
buttons for 5 seconds.
1.
If have any questions, please contact
technology support.
