ICP DAS USA ISaGRAF VP-23W7, User Manual

Page: 122 / 192

ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
8-2
I/O Connection Setting:
The ISaGRAF variables to be exchanged with InduSoft must be declared with a Modbus “Network
Address” as below.
Please save & compile the ISaGRAF example project & then download to the PAC.
If you are not familiar with ISaGRAF, please refer to
section 4.1 to 4.3 .
Please set No. as “Decimal”
In this example:
Please assign No. 1 to DI_1.
No. 11 to DO_1
No. 21 to AO_1
No. 31 to Internal
An empty LD is just fine