87K4/5/8/9 RS-485 I/O Expansion Unit
----- 19
4.2 Search Result:
When use DCON Utility to search 87K4/5/8/9 I/O Expansion unit and the 87K I/O modules,
only 87K I/O modules can be found.
4.3 To Configure i-87K I/O modules:
There are DCON Protocol and Modbus Protocol I/O module, for most general settings, they
need to choose the wanted property and click setting to make it effect.
If attempted to change the Baud Rate, Checksum and Protocol, the
INIT* pin needs to
connect to GND
. After successfully configuring these properties, the I/O modules must be
reset the Power
to bring the settings into effect.
For more detail about using DCON Utility to Configure I/O modules, please refer to the
CD:\NAPDOS\Driver\DCON_Utility\Manual or
ftp://ftp.icpdas.com.tw/pub/cd/8000cd/napdos/driver/dcon_utility/manual/
Summary of Contents for I-87K Series
