87K4/5/8/9 RS-485 I/O Expansion Unit
----- 10
Chapter3. Setup the Expansion unit and I/O modules.
The first thing is to make sure the I/O Expansion unit is correctly wired, the basic wiring
includes
power supplier
and
communicate interface
.
3.1 Power Supplier:
http://www.icpdas.com/products/Accessories/power_supply/power_list.htm
1. The power supply must be
DC power b10V to +30V
.
2. Wiring:
+Vs connects to +Vs
;
GND connects to GND
.
3. Carefully calculate the total watts or current consumption of the system.
If the total watts were not enough, the system will become unstable and abnormal.
Total watts =
Σ
(supplied Voltage)*( Ampere consumed)
Summary of Contents for I-87K Series
