I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 59
2.35 $AAI
Description
: Read the value of *INIT pin.
Syntax
: $AAI[chk](cr)
$ is a delimiter character
AA=2-character HEX module address, from 00 to FF
[chk]=2-character checksum, if checksum disable
no [chk]
(cr)=0x0D
Response
: valid command
!AAS[chk](cr)
invalid command
?AA[chk](cr)
no response
syntax error or communication
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
S=0
INIT* pin is connected to GND pin
1
INIT* pin is open
[chk]=2-character checksum, if checksum disable
no [chk]
(cr)=0x0D
Example
:
command: $01I(cr)
response : !010(cr)
command: $02I(cr)
response : !021(cr)
INIT* pin is connected to GND pin.
INIT* pin is open.
7080/7080D
