HRT-227CS, HART to Single Mode Fiber Converter (version 1.00)
–
2015/02/02
Page: 12
Copyright © 20
15 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
2.6. Dip Switch (Mode)
The dip switch (Mode) is used to switch module firmware function (firmware
operation or firmware update) of HRT-227CS. (The detailed description for firmware
update refers to chapter 5)
Figure 2-5 The Dip Switch (Mode) Location
There are 4 values on the dip switch and described as the below table.
Table 2-3 Function Description of Dip Switch
Dip Switch State
Value
Function
00
Firmware Operation
01
Reserved
02
Reserved
03
Firmware Update
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
