![background image](http://html1.mh-extra.com/html/icp-das-usa/dgw-521/dgw-521_user-manual_3515913024.webp)
General Command Sets
Command Response
Description
%AANNTTCCFF !AA
Set
Module
Configuration
$AA2
!AANNTTCCFF Reads the Module Configuration
$AA5
!AAS
Reads the Reset Status
$AAF
!AA(Data)
Reads the Firmware Version
$AAM
!AA(Data)
Reads the Module Name
$AAP
!AASC
Reads the Protocol
$AAPN !AA
Sets the Protocol, N=0 for DCON protocol, 1
for Modbus RTU protocol
~AAO(Name)
!AA
Sets the Module Name
~AARD !AAVV
Reads the response delay time, VV in hex
format
~AARDVV !AA
Sets the response delay time, VV = 00 ~ 1E
in hex format
DALI Command Sets
Command Response
Description
@AADCiddcc !AA
Sends DALI command, i: command index, 0
~ 7, dd: command address in hex, cc:
command data in hex
@AADE !AAhh
Gets the execution status of the DALI
commands, hh in hex, each bit for each
command and the value is 1 for command
finished and 0 for command not finished or
no command executed
@AADF !AAs
Gets the status of finding all DALI devices, s
is 0 for finished and 1 for finding
@AADF1 !AA
Finds all of the DALI devices connected on
the DALI bus
@AADN !AAnnss
Gets the status of address allocation, nn is the
number of addresses allocated in hex,
ss is the allocation status
00: no allocation command
01: finished
02: allocating
03: old address not available
04: invalid address data
05: too many addresses to be allocated
DGW-521 User Manual, Rev. A1.0
24
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru